Power Plant Condensate Treatment System Polypropylene Fiber String Wound Cartridge Filters

• Material: Polypropylene Fiber
• Application: Industry, Food and Beverage, Medicine, Textile, Metallurgy
• Type: Wound Filter
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: XRL
• Filter Connector: Customize
• Filtration Grade: 5 Micron
• Activated Carbon Filter Type: Wholesale
• Size: 1778/1524mm
• Temperature: <85 Degree
• Maximum Pressure Difference: 0.245MPa
• Customize: Yes
• Transport Package: Carton
• Specification: Customized
• Trademark: BF
• Origin: China
• Production Capacity: 100000/Month
• Package Size: 110.00cm * 30.00cm * 30.00cm
• Package Gross Weight: 6.000kg

Product Description

Product Description

Powder resin coated filter and pre-filter are generally used in power plant condensate water fine treatment system. The filter element installed inside the filter can be coated with fiber powder and yin-yin resin powder on the surface to achieve the purpose of filtration and salt removal. When the pressure difference of the filter inlet and outlet or the electrical conductivity or silicon of the filter effluent reaches the set value, the filter is in a failure state. At this time, the filter is exploded and backwashed, and then the film is re-laid and put into operation.
The parameters of the winding filter produced by our company are all controlled by computer, and the line is evenly arranged between the lines, which can fully guarantee the comprehensive performance of the product. Moreover, 304 stainless steel porous support tube is adopted, and its high strength can fully withstand the instantaneous high pressure impact generated in the process of resin film explosion and backwashing, and ensure that the filter element does not deform and the polypropylene fiber material does not fall off. The operation safety of condensate fine treatment system is guaranteed. 
Features:
1.The parameters of continuous polypropylene fiber wire winding filter element are arranged by computer to ensure the comprehensive performance of the product.
2.The entire length is filtered with a uniform filter resin coating.
3.All with threaded interface center pipe and connector.
4.Specially designed for backwashing.
5.High intercepting capacity, low running resistance, strong filtering and adsorption force.
6.The equipment to install this filter element has a large processing capacity, a small area, and the main workshop is easy to arrange.
7.The system is simple, there is no acid and base consumption and pollution of recycled acid and base waste, and the waste is easy to deal with, which is conducive to environmental protection.
8.The investment cost is low, and the pressure loss before and after the condensate treatment is small.
Application:
1.Power plant condensate treatment system.
2.Petrochemical water treatment desalting, removing iron.
3.RO security filtration, desalination pretreatment.

Performance parameters: 

	LY-70" Filter Element	LY-70" A Filter Element	LY-60" Filter Element
Medium	polypropylene fiber	polypropylene fiber	polypropylene fiber
Central Skeleton Material	304	304	304
Bottom Structure	M6, M8, M10 thread
Inner Diameter	30mm	30mm	35mm
Outer Diameter	50mm	50mm	50mm
Filter Efficiency	5 micron	5 micron	5 micron
Length	1778mm	1778mm	1524mm
Flow Rate	3.1-3.2 m³/h	3.1-3.2 m³/h	2.7 m³/h

Our Main Products

 

Company Profile

 

Packaging & Shipping

1.Package Requirements: Carton box and pallets.
2.Delivery Time: 7-15 working days after advanced payment.
3.Ways of Transportation: By International express / air / sea / railway.
4.Loading Port: Shanghai Port,Tianjin Port,Qingdao Port or other Chinese ports.

FAQ

1.When can I get the quotation?
We usually quote within 24 hours after we get your inquiry.If you are very urgent to get the price, please call us or tell us from your email,so that we will regard your inquiry priority.

2.How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality.
If you need the samples, we will charge for the sample cost.But the sample cost can be refundable after order confirmation when your quantity of the order is more about the MOQ.
 
3.Can you do the design for us?
Yes.We have a professional team having rich experience in air compressor parts design and manufacturing.Just tell us your ideas and we will help to carry out your ideas into perfect product.It does not matter if you have the part No. or not.Send us drawing pictures or specifications,we'll customize it for you.

4.How long can I expect to get the sample?
After you pay the sample charge and send us confirmed files, the samples will be ready for delivery in 3-7 working days.
 
5.What is your terms of delivery?
We accept EXW, FOB, CIF, etc. You can choose the one which is the most convenient or cost effective for you.