| Customization: | Available |
|---|---|
| Type: | High Flow Water Flow |
| Usage: | Environmental Protection, Chemical Industry, Industry |
|
Still deciding? Get samples of US$ 150/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
About 90% of the pollutants in the condensate system are metal solid particles. Most of them are iron filings and their compounds (its particle size is mainly 6-15 microns), which wear the machine is very serious, so when the unit is started, the condensate must be refined to remove iron and other solid particles. Our company with many years of filtration technology design experience, and reference to foreign materials developed and produced large flow condensate water filter element, can effectively control solid pollutants such as metal and silicon in the condensate water, to avoid the formation of oxides in the high temperature state after the unit is started, and greatly shorten the start-up time of the unit.
Features:
1.Allowing high flow of media through the filter material has the advantages of high efficiency, low pressure loss and long life.
2.The filter element is divided into two structural forms: outside in and out and inside in and out, which makes the filter element more widely used and more flexible in installation and use.
3.The filter element can withstand the maximum working pressure difference of 0.245MPa.
4.The β of the filter element reaches more than 1000.
5.Multiple filter elements can be installed in the filter housing, which can use a wide flow range, whether it is started or continuous operation.
6.The filter element is durable and enables the least economical configuration of filters.
Specification Parameter:
1.
| 20 Inch | 40 Inch | |
| Maximum Flow | 40 m³/h | 70 m³/h |
| Size | 155*508 mm | 155*1007mm |
| Materials | Filter media: Fiberglass or PP End cap: ABS Wire lining: PP |
|
| Filter Fineness | 5/15/30/50 micron | |
| Filter Type | Pleated | |
| Maximum Service Temperature | 80 Degree | |
| Operating Pressure Differential | <0.245MPa | |
| Filter Methods | Outside in inside out | |
| 20 Inch | 40 Inch | 60 Inch | |
| Size | 161*508 mm | 161*1016mm | 161*1535mm |
| Maximum Flow | 40 m³/h | 70 m³/h | 110 m³/h |
| Materials | Filter media: Fiberglass or PP End cap: ABS Wire lining: PP |
||
| Filter Fineness | 6/15 micron | ||
| Filter Type | Pleated | ||
| Maximum Service Temperature | 80 Degree | ||
| Operating Pressure Differential | <0.245MPa | ||
| Filter Methods | inside in outside out | ||
| 40 Inch | 60 Inch | |
| Size | 165*1016mm | 165*1535mm |
| Maximum Flow | 70 m³/h | 110m³/h |
| Materials | Filter media: Fiberglass or PP End cap: ABS Wire lining: PP |
|
| Filter Fineness | 5/15/30/50 micron | |
| Filter Type | Pleated | |
| Maximum Service Temperature | 80 Degree | |
| Operating Pressure Differential | <0.245MPa | |
| Filter Methods | Outside in inside out | |
){kind=link}