Industrial 70" PP Cotton String Wound Sediment Water Filter

• Customization: Available
• Material: PP/Cotton/Fiberglass
• Application: Industry
• Model NO.: SRL
• Type: Wound Filter
• Filter Connector: M6 /M8/M10 Screw Thread
• Filtration Grade: 5 Micron
• Activated Carbon Filter Type: Bulk Type
• Length: 1778/1524mm
• Flow Rate: 3.1-3.2/2.7
• Ecommended Maximum Pressure Difference: 0.245MPa
• Maximum Working Temperature: 85 Degree
• Transport Package: Carton/Wooden Box
• Specification: 60/70 Inch
• Trademark: Neutral
• Origin: China
• Package Size: 180.00cm * 30.00cm * 30.00cm
• Package Gross Weight: 2.000kg

Product Description

Product Description

String Wound Filter Cartridges are manufactured with structured loose outer layers and tight inner layers to offer true depth filtration for high dirt holding capacity and extremely low media migration. The main advantage of the string wound filter cartridge is its exceptionally high structural strength, therefore, they can withstand higher PSID and severe operating conditions.

Features:
· Broad range of application due to a wide chemical compatibility
· Many different combinations of filter materials and pore size
· String Wound depth filter cartridge
· High dirt holding capacity
Applications:
· Consumer Products
· Food and Beverage
· Drinking Water
· Pharmaceutical
· Edible Oil
· Inks & Paints
· Photographic
· Plating Solutions
· Petrochemicals
· Waste Water
· Chemicals
· Oil

Specifications:

Filter Media	Polyethylene, cotton, glass fiber
Outside Diameter	63mm, 115mm
Inner Diameter	28mm
Length	9.87'', 10'', 20'', 30'', 40''
Micron Rating	1micron, 5micron, 10micron, 20micron, 30micron, 50micron, 75micron, 100micron
Max. Operating Temperatures	PP:80ºC
	Cotton:120ºC
	Glass Fiber:200ºC
Max. Pressure drop	2.0 Bar@25ºC

Powder resin coated filters and pre-filters are generally applied power plant condensate treatment system, filter element installed inside the filter,the surface can be coated with fiber powder and yin-yang resin powder to achieve the purpose of filtration and salt removal, when the filter inlet and outlet pressure difference or filter water when the conductivity or silicon reaches the set value, the filter is in the failure state, at this time, the filter is exploded and backwashed, and then re-lay the film put into operation. The parameters of the winding filter element produced by our company are all controlled by computer, and the line is evenly arranged between the lines, which can fully ensure the integration of the products combined performance, coupled with the use of 304 stainless steel porous support pipe, its high strength can fully withstand the resin film explosion and backwashing process of the instant high pressure impact, and ensure that the filter element does not deform, polypropylene fiber material does not fall off, so that the operation safety of the condensate water fine treatment system is guaranteed.

Features:

1. Continuous polypropylene fiber wire winding filter element, filter element parameters are all arranged by computer to ensure the comprehensive performance of the product.
2. Full length uniform filter resin coating filter.
3. All stainless steel with threaded connection center pipe and fittings.
4. Specially designed for backwash operation.
5. High intercepting capacity for full length.
6. The operation resistance is small, the filtration and adsorption force is strong.
7. Different sizes of filter elements are available for powder resin filters/prefilters for various applications.
8. The equipment to install this filter element has a large processing capacity, a small area, and the main workshop is easy to arrange.
9. The system is simple, there is no acid and base consumption and pollution of recycled acid and base waste, and the waste is easy to deal with, which is conducive to environmental protection.
10. The investment cost is low, and the pressure loss before and after the condensate treatment is small.

technical specification
	LY-70"	LY-70"A	LY-60"
Media	PP	PP	PP
Bottom Structure	M33X2,M33X1.5,G1",φ30.1 (24 Thread/Inch)  55° connection thread
Top Structure	M6 ,M8,M10  Screw Thread
ID  (mm)	30	30	35
OD  (mm)	50	50	50
Filtration Class  (μm)	5	5	5
Length  (mm)	1778	1778	1524
Flow Rate  (m³/h)	3.1-3.2	3.1-3.2	2.7
Recommended Maximum Pressure Difference  (Mpa)	0.245	0.245	0.245
Maximum Working Temperature (ºC)	85	85	85

Other Water Filter Cartridges